Transmax 38x38 Automatic

Clam heat press, automatic opening, 38 x 38 cm plate.

Professional and high quality heat press, suitable for:

- flex and flock thermo-adhesive for cutting plotter

- transfer for laser printers

- thermo-adhesive for inkjet printers

- sublimation printing

Automatic timer, digital temperature setting, automatic opening.

Maximum power 1.800 watt, maximum temperature 230 degrees.

Spare plates available in various formats, for printing collars, sleeves, shoes, etc

Also availlable economic thermo-adhesive flex

Shipping in all Europe.

COMPARISON WITH SIMILAR HEAT PRESSES

Differences compared to:

- Secabo TC5 heat press: identical technical characteristics, it can also be fitted with interchangeable lower plates in various formats. The Secabo version additionally has the Bluetooth function

- Transmax 40x50 cm heat press: same model but equipped with a larger heating plate (40x50 cm), therefore also suitable for printing A3 size transfers

- 38x38 cm manual heat press: much cheaper, aesthetically pleasing, with identical plate dimensions, it is however a medium pressure model and does not allow the printing of  self-weeding transfers for laser transfer printers. Equally suitable for printing on rolls of thermoadhesives for cutting plotters or for sublimation on t-shirts

Differences compared to the 2Stamp 38x38 cm automatic model:

- the Transmax model has an upper plate mounted on springs, which allows for a more homogeneous distribution of the transfer pressure

- different leverage (which in the Transmax version is longer, therefore allowing a higher transfer pressure with less effort for the user)

- different finishes (the Transmax version has a more complete display, although both versions indicate both temperature and timer)

- the Transmax model can mount replacement plates in various formats, to print smaller supports (collars, sleeves, shoes, etc.)

- the Transmax does not have a sliding bottom plate, unlike the 2Stamp version

- the higher cost compared to the 2Stamp model

FIELDS OF USE

This heat press allows you to successfully heat print any type of fabric, such as cotton, polyester and nylon, as well as any thin material capable of resisting high temperatures, such as glass sheets, aluminium, tiles etc.

Heat press perfect for applying transfers printed with laser transfer printers, we recommend using an A4 white toner printer, to be able to print any type of graphics with professional results. It can also be coupled with a cutting plotter or a sublimation printer. Suitable for:

- thermoadhesives for cutting plotters (flex and flock of any type)

- DTF printing

- fixing direct DTG printing and screen printing

- thermoadhesive sheets for inkjet printers

- thermoadhesive sheets for laser printers

- self-cutting transfer paper for dark fabrics for laser printers, which require high transfer pressure

- sublimation on objects and synthetic fabrics

- fabrics in general up to a maximum thickness of approximately 8-10 mm